Bonded 93 Blue
- Dodaj recenzję:
- Kod: SPF4633K
-
Dostępność:
Zapytaj o dostępność
-
Historia ceny
- 599,01 zł
- szt.
-
Płatność gotówką, Płatność przelewem, Paynow, Pobranie
Our engineering department as well as our lead suspension technicians across the Fulcrum network, have done extensive design and technical analysis of the Triton, Challenger and Pajero Sport platform. They have confirmed that a droop stop is an optional kit, which increases droop and suspension travel, but should be installed at the risk of the vehicle owner when their 4WD is lifted.
Our engineers and lead suspension technicians found that for Mitsubishi 4WD vehicles after 2009 (all except ML Triton), when installing a lift kit plus a droop stop kit, the standard OE control arms (original factory control arms) may contact the shock absorber (observed contact ~86% of the time across multiple vehicle tests).
During testing when a Mitsubishi 4WD has been lifted AND a droop stop kit has been installed, our engineers and lead suspension technicians have seen catastrophic shock failures. Caused due to suspension geometry changes pushing the vehicles OE upper control arm into repeated contact of the shock absorber, which in turn causes shock failure. Specifically when Mitsubishi 4WD vehicles after 2009 are lifted and a droop stop kit is installed, our engineers have recorded a high failure rate of Bilstein and other branded shock absorbers. However, Formula shock absorbers due to their design still make contact with the OE upper control arm but receive much lower damage, decreasing Formula shock failure rate over other brands. As noted this is only the case when a lift kit plus a droop stop kit are installed.
Our engineering department and lead suspension technicians do not recommend the use of the front droop stop kit on lifted Mitsubishi 4WD vehicles after 2009, with OE control arms.
If you would like your lifted Mitsubishi 4WD to have increased droop and travel by adding a droop stop kit, you must install a SuperPro upper control arm to correct this issue. By default the SuperPro upper control arm kit includes the droop stop kit. The SuperPro upper arm control arm kit has been designed specifically to resolve this issue and also correct alignment issues.
SuperPro Bushings are the perfect suspension upgrade or replacement solution!
- Lifetime Warranty
- Enhances your vehicles handling and performance
- Unaffected by extreme temperatures, oils, water or coolant
- A superior alternative to rubber: providing higher quality, quieter, longer lasting bushings
- Made with SuperPro's proprietary engineering-grade polyurethane formula
- Designed, engineered and manufactured in Australia
Upgrade your car with SuperPro for enhanced performance, better alignment and increased service life.
SuperPro is the leading aftermarket suspension bushing manufacturer with 40+ years of experience. SuperPro has a competitive edge over all aftermarket bushing brands with our products being developed, tested and designed in Australia, ensuring greater quality during the manufacturing and engineering process with the ability to develop advanced bushing designs. SuperPro bushings offer greater quality and reliability through their unique materials, made from a proprietary polyurethane mix which has been thoroughly tested and refined over 40+ years to suit Australia’s harsh conditions. Our innovative bushings have been produced with the input of highly skilled suspension technicians and engineers, ensuring the best quality and evaluation in product development.
SuperPro polyurethane bushings provide various benefits including corrected or maintained steering geometry, better handling, increased safety, improved tyre wear, improved fuel efficiency and enhanced performance. Quality and excellence are ensured through an experienced and dedicated engineering team at SuperPro.
Informacje o bezpieczeństwie produktu Informacje o producencie
Zadaj pytanie dotyczące produktu. Nasz zespół z przyjemnością udzieli szczegółowej odpowiedzi na zapytanie.